Screw counter KCT


MODEL: KCT-01 / KCT-04

The number of screw bolting can be precisely detected to avoid bolting failure. After setting the number of screw bolting, it can be detected by the screw counter if a worker failed to tighten a screw. Further more, it can also check if a screw is tightened exactly in its position.

The number of those screws, which are not tightened yet, can be counted and displayed on the screw counter. If the screw tightening process stopped during working, the buzzer will sound automatically to warn the users. This is applied to AC Type and DC Type Full-Auto Electric Screwdrivers.

KTC-04 can be applied to all kind of Full-Auto Electric Screwdrivers. The output and input of signal are available for KCT-04. KCT-04 is also available for using in semi-auto production line, from which the worker can avoid improper operation. The signal of bolting screw is output from screwdriver and the counts can be displayed precisely in screw counter. An AC cord is attached to each screw counter. It is simple and easy to use. A set of KTC-04 can connect with 4 pieces of electric screwdriver at most.


  KCT-01 KCT-04
接起子數 1 4
The number of setting counts 1~99次(計數器減法方式)
Timer setup LO TIME 0.0~2.0 sec.
HI TIME 0.0~9.0 sec.
Function LC BA LC AC
Size 80(H) x 75(W) x 13(D) / 94g 92(H) x160(W) x40(D) / 360 g


Search/Tėm kiếm sản phẩm:
Copyright Š 2006 Anh Duong Co. Ltd      Last modified: 15/01/2015

Tel: 84-4-33546799 / Hotline: 0906015449; Fax: 84-4-33540856 Email:; GPS location  Skype: lehiep1 

Products: FAG   TIMKEN  NSK SKF IKO THK  NTN  Nachi   Koyo  Car's bearing  Bearing's stock  ADB

Web: relax donate